Flange Gaskets Complete Selection Guide
Proper gasket selection is critical for leak-free flange connections in industrial piping systems.
Gasket Materials
- Non-asbestos fiber: General service
- Graphite: High temperature up to 450C
- PTFE: Corrosive chemicals
- Spiral wound: High pressure applications
- Ring type joint: Extreme pressure
Normen für die Flanschgröße
- ASME B16.5: American standard
- EN 1092-1: European standard
- JIS B2220: Japanese standard
- GB/T: Chinese standard
Installation Tips
- Clean flange faces thoroughly
- Center gasket properly
- Tighten bolts in star pattern
- Use calibrated torque wrench
Das könnte Sie auch interessieren
ASME B16.5 Flange Guide: 2025 Latest Edition, Scope, Ratings and Dimensions
A practical ASME B16.5 guide covering the 2025 latest edition, NPS 1/2 through NPS 24 scope, flange classes, dimensions, materials, markings, testing and differences from ASME B16.42.
Read 79 · Comments 0
-
2026-06-22
Weld Neck Flange Guide: Socket Weld vs Weld Neck Flange, Uses, Standards and Selection
A professional weld neck flange guide covering socket weld vs weld neck flange differences, advantages, standards, dimensions, materials, installation and quotation requirements.
Lesen 250 - Kommentare 0
-
2026-06-21
Casting vs Forging: How to Choose the Right Manufacturing Process for Industrial Flanges
Casting vs forging explained for industrial flange buyers: compare grain flow, mechanical properties, defect risks, cost, standards, inspection and application suitability before specifying a flange.
Lesen 173 - Kommentare 0
-
2026-06-21