Thẻ: Đối diện

Flange Facing Types Explained The flange facing (sealing surface) is critical for creating a leak-tight joint. Different facing types are designed for specific pressure ranges, temperatures, and sealing requirements. Raised Face (RF) Most Common Type Raised sealing surface (1.6mm or 6.4mm height) Concentric or spiral serrations for gasket grip Suitable for Class 150-2500 Works with […]

Hiểu về mặt bích nối chồng Mặt bích nối chồng bao gồm hai bộ phận: đầu nối và mặt bích đỡ. Đầu nối được hàn đối đầu với ống, trong khi mặt bích đỡ có thể xoay tự do quanh đầu nối, giúp dễ dàng căn chỉnh lỗ bu lông trong quá trình lắp ráp. Đặc điểm thiết kế Cấu trúc hai mảnh: đầu nối + mặt bích đỡ Mặt bích đỡ có thể xoay […]

Flange Standards Overview Flange design, manufacturing, and inspection must follow strict international and national standards. Understanding different standard systems is crucial for proper flange selection. ASME Standards (American) ASME B16.5: NPS 1/2 to 24 Pressure Classes: 150, 300, 600, 900, 1500, 2500 Face Types: RF, FF, RTJ, MFM EN Standards (European) EN 1092-1: Main European […]

Function and Purpose A Blind Flange is a solid flange without a center opening, used to close off the end of pipes, valves, or pressure vessels. It serves as a terminal closure component, playing a critical role during maintenance, inspection, or system expansion. Main Applications Pipe Closure: Seal pipe ends to prevent medium leakage System […]

Slip On Flange Overview A Slip On Flange (SO Flange) is a flange type where the pipe is inserted into the flange bore and then fillet welded both inside and outside. Due to easy installation and lower cost, slip on flanges are among the most commonly used flanges in medium-low pressure piping systems. Main Advantages […]

Flange Basics A flange is one of the most critical connection components in industrial piping systems, used to connect pipes, valves, pumps, and other equipment. Main Functions Connection: Reliably join pipe sections Sealing: Work with gaskets Maintenance: Removable design Flexibility: Direction changes Common Types Weld Neck: High pressure and temperature Slip On: Easy installation, lower […]