What Are Orifice Flanges and How Do They Work
Orifice flanges are specialized piping components designed for precise flow measurement in pressurized systems. Unlike standard weld neck flanges, orifice flanges feature tapped holes (pressure taps) drilled radially through the base, enabling accurate differential pressure readings across an orifice plate.
At Songhai Flange, we understand that proper flow measurement is critical for custody transfer, process control, and regulatory compliance.
The Science Behind Orifice Flow Measurement
When fluid passes through an orifice plate precisely sized bore, it creates a pressure differential between the upstream and downstream sides. This allows instrumentation to calculate exact flow rates using Bernoulli principle.
The accuracy depends on:
- Proper flange tapping location (flange taps, corner taps, or D and D/2 taps)
- Correct orifice plate bore diameter and beta ratio (typically 0.3 to 0.7)
- Adherence to ASME B16.36 and API 2530 standards
- Proper installation orientation based on fluid type
Orifice Flange Types and Configurations
Weld Neck Orifice Flange Pairs
The most common configuration for critical applications with jack screws for maintenance without cutting pipeline.
Slip-On and Threaded Options
For lower-pressure utility applications (Class 150 and 300), cost-effective alternatives with reduced space requirements.
Material Selection
- Carbon Steel (A105): Oil, gas, petrochemical, -20F to 800F
- Stainless Steel (F304/F316): Corrosive service, marine applications
- Low-Temp (A350 LF2): LNG, cryogenic applications
- Chrome-Moly (F11/F22/F91): High-temperature power generation
ASME B16.36 Specifications
| Specification | 详细信息 |
|---|---|
| Size Range | 1 inch through 24 inch |
| Pressure Classes | 300, 400, 600, 900, 1500, 2500 |
| 材料 | A105, F304/F304L, F316/F316L, A350 LF2 |
| Flow Standard | API 2530 / ISO 5167 |
Why Choose Songhai Flange
Songhai Flange manufactures orifice flanges to ASME B16.36 standards with full material traceability. Contact us for competitive quotes and technical support.
WhatsApp： +86-18658777855
电子邮件： 1007788887@qq.com
您可能还喜欢
孔板法兰完整指南 选择、安装和流量测量标准
什么是孔板法兰及其工作原理 孔板法兰是一种专门的管道元件，用于加压系统中的精确流量测量。与标准焊颈法兰不同，孔板法兰的特点是在底座上沿径向钻有螺纹孔（压力抽头），从而能够准确读取孔板上的压差。松海法兰深知 [...]
ASME B16.5 法兰螺栓扭矩值完整参考表
为什么正确的法兰螺栓扭矩可以防止代价高昂的泄漏 不正确的螺栓扭矩是法兰接头故障的主要原因。应用正确的扭矩可确保垫片的适当压缩，并防止停机和安全事故的发生。目标扭矩计算公式 ASME PCC-1 附录 K 公式：T = K x D x F / N T = 每 [...]的目标扭矩
PED vs ASME vs API 哪种法兰标准最严格
了解法兰标准 ASME、API、ISO 和 PED 之间的比较，哪种标准最严格？答案取决于您测量的内容。PED：欧洲法律授权 压力设备指令（2014/68/EU）是欧盟针对 0.5 巴以上压力设备的立法指令。与 ASME/API 自愿性标准不同，PED 是一项要求欧盟 [...] 使用 CE 标志的法规授权。