Classification des articles
Catégorie : Blog
Understand flange parts and flanges body part functions, including the flange face, hub, bore, bolt holes, bolt circle and gasket seating area for reliable piping connections.
Compare Class 300 and Class 600 flanges, including pressure rating, temperature derating factors, flange class selection, cost, dimensions, and industrial applications.
Learn whether RF and FF flanges can be mated, why face type mismatch affects gasket compression, and how to choose safer flange connections for industrial piping.
A practical ASME B16.5 guide covering the 2025 latest edition, NPS 1/2 through NPS 24 scope, flange classes, dimensions, materials, markings, testing and differences from ASME B16.42.
A professional weld neck flange guide covering socket weld vs weld neck flange differences, advantages, standards, dimensions, materials, installation and quotation requirements.
Casting vs forging explained for industrial flange buyers: compare grain flow, mechanical properties, defect risks, cost, standards, inspection and application suitability before specifying a flange.
Learn how to pronounce flange correctly, what flange and SO flange mean, how slip-on flanges work, and how to specify the right industrial pipe flange.
A practical guide to ANSI flange dimensions, ANSI flange sizes and flange ratings, including the real meaning of Class 150 and Class 600, standards, materials and selection.
A practical sourcing guide to the Top 5 Pipe Fittings and Flanges Manufacturers, including Songhai Flange, standards, materials, inspection, export support and buyer selection criteria.
GB/T 4334.1-2000: Method of 10% Oxalic Acid Etch Test for Stainless Steels National Standard of the People’s Republic of China ICS 77.040.99 Released: 2000-10-25 Implemented: 2001-09-01 Issued by: State Bureau of Quality and Technical Supervision 1. Scope This standard specifies the specimen, test solution, test equipment, test conditions and procedures, evaluation of test results, and […]
GB/T 6401-1986 Méthode micrographique pour la détermination de la fraction de surface de la phase α dans les aciers inoxydables duplex ferritiques-austénitiques à l'aide de diagrammes Champ d'application La présente norme spécifie la méthode micrographique pour la détermination de la fraction de surface de la phase α dans les aciers inoxydables duplex ferritiques-austénitiques. 1. Préparation des éprouvettes 1.1 Les éprouvettes doivent être prélevées à l'état de livraison. Le lieu d'échantillonnage et [...]
GB/T 13305-2008 - Méthode micrographique pour déterminer la teneur en surface des phases α dans les aciers inoxydables Numéro de la norme : GB/T 13305-2008 ICS : 77.040.99 Publiée : 19 août 2008 Entrée en vigueur : 1er avril 2009 Autorité de délivrance : Administration de la normalisation de la République populaire de Chine Remplace : GB/T 13305-1991 et GB/T 6401-1986 Préface Cette norme remplace GB/T 6401-1986 et GB/T 13305-1991. Les [...]