Proper Flange Bolt Torquing Guide
Correct bolt torque is critical for achieving leak-free flange joints. Under-torquing causes gasket blowout, while over-torquing can damage gaskets or warp flange faces.
Why Bolt Torque Matters
- Ensures uniform gasket compression
- Prevents flange leakage under operating conditions
- Compensates for gasket creep and relaxation
- Maintains joint integrity during thermal cycling
Class 150 Bolt Torque Values (ft-lbs)
| Size | ขนาดของโบลต์ | ปริมาณ | Non-Lubricated | Lubricated |
|---|---|---|---|---|
| 1/2″ | 1/2″-13 | 4 | 45 | 35 |
| 1″ | 5/8″-11 | 4 | 85 | 65 |
| 2″ | 3/4″-10 | 4 | 150 | 115 |
| 4″ | 5/8″-11 | 8 | 85 | 65 |
| 6″ | 3/4″-10 | 8 | 150 | 115 |
| 12″ | 7/8″-9 | 12 | 250 | 190 |
Class 300 Bolt Torque Values (ft-lbs)
| Size | ขนาดของโบลต์ | ปริมาณ | Non-Lubricated | Lubricated |
|---|---|---|---|---|
| 1/2″ | 1/2″-13 | 4 | 65 | 50 |
| 2″ | 3/4″-10 | 8 | 185 | 140 |
| 4″ | 3/4″-10 | 8 | 185 | 140 |
| 6″ | 7/8″-9 | 8 | 290 | 220 |
| 12″ | 1″-8 | 12 | 425 | 320 |
Class 600-2500 Torque Guidelines
Higher pressure classes require significantly higher torque values. Always refer to manufacturer specifications for Class 900, 1500, and 2500 flanges.
Bolt Torquing Procedure
- Clean: Remove dirt, rust, and old gasket material from flange faces
- Inspect: Check flange faces for damage or warping
- Lubricate: Apply anti-seize compound to bolt threads and nut faces
- Insert: Place gasket centered on flange face
- Hand-tighten: Snug all nuts finger-tight
- Pattern: Use star/cross pattern for even compression
- Sequence: Torque to 30%, then 60%, then 100% of final value
- Verify: Recheck all bolts after initial torque
Important Considerations
- Gasket Type: Different gaskets require different compression loads
- Bolt Material: ASTM A193 B7 vs B16 have different strength ratings
- Lubrication: Reduces required torque by 20-25%
- Temperature: Hot torquing may be required for high-temperature service
- Re-torquing: Consider re-torquing after thermal cycles
ข้อผิดพลาดทั่วไปที่ควรหลีกเลี่ยง
- Using impact wrenches without calibration
- Torquing in circular pattern instead of star pattern
- Skipping the multi-step torque sequence
- Reusing damaged or stretched bolts
- Ignoring gasket manufacturer torque recommendations
Proper bolt torquing is essential for leak-free flange joints. Always follow established procedures and use calibrated torque tools.
WhatsApp: +86-18658777855
อีเมล: 1007788887@qq.com
คุณอาจสนใจ
DIN Flanges vs ANSI Flange: ANSI Class 150, PN Rating and Selection Guide
A practical guide comparing DIN flanges and ANSI flange standards, including ANSI Class 150, PN meaning, flange rating ANSI systems, bolt patterns, dimensions and selection tips.
Flange Coupling Guide: Coupling Flange Type, Flanged Coupler and Shaft Applications
A practical guide to flange coupling, coupling flange type selection, flanged coupler structure, flange shaft coupling applications, installation and maintenance.
What Is an Orifice Flange? Orifice in Piping, Orifice Pipe and Flow Measurement Guide
A practical guide explaining what an orifice flange is, how an orifice in piping works, orifice pipe flow measurement, pressure taps, orifice plates and selection tips.