คู่มือการวัดขนาดและซ่อมแซมหน้าแปลน
Proper flange sizing and timely repair ensures safe pipeline operation.
ตารางขนาดหน้าแปลน
- NPS 1/2 to NPS 24: Standard range
- DN15 to DN600: Metric sizes
- คลาส 150 ถึง 2500: อัตราความดัน
- มีขนาดพิเศษตามสั่ง
วิธีการซ่อมแซมหน้าแปลน
- Face resurfacing for minor damage
- Bore machining for worn surfaces
- Bolt hole repair and re-drilling
- Weld overlay for severe wear
How to Replace Flange
- Isolate and drain pipeline
- Remove old bolts and gasket
- Clean mating surfaces
- Install new flange and gasket
- Torque bolts to specification
- Pressure test before service
คุณอาจสนใจ
Can You Mate RF and FF Flanges? A Practical Guide for Safe Flange Connections
Learn whether RF and FF flanges can be mated, why face type mismatch affects gasket compression, and how to choose safer flange connections for industrial piping.
Read 33 · Comments 0
•
2026-06-24
ASME B16.5 Flange Guide: 2025 Latest Edition, Scope, Ratings and Dimensions
A practical ASME B16.5 guide covering the 2025 latest edition, NPS 1/2 through NPS 24 scope, flange classes, dimensions, materials, markings, testing and differences from ASME B16.42.
อ่าน 115 · ความคิดเห็น 0
•
2026-06-22
Weld Neck Flange Guide: Socket Weld vs Weld Neck Flange, Uses, Standards and Selection
A professional weld neck flange guide covering socket weld vs weld neck flange differences, advantages, standards, dimensions, materials, installation and quotation requirements.
อ่าน 293 · ความคิดเห็น 0
•
2026-06-21