Hướng dẫn xác định kích thước và sửa chữa mặt bích
Proper flange sizing and timely repair ensures safe pipeline operation.
Bảng kích thước mặt bích
- NPS 1/2 to NPS 24: Standard range
- DN15 to DN600: Metric sizes
- Loại 150 đến 2500: Áp suất định mức
- Custom sizes available
Các phương pháp sửa chữa mặt bích
- Face resurfacing for minor damage
- Bore machining for worn surfaces
- Bolt hole repair and re-drilling
- Weld overlay for severe wear
How to Replace Flange
- Isolate and drain pipeline
- Remove old bolts and gasket
- Clean mating surfaces
- Install new flange and gasket
- Torque bolts to specification
- Pressure test before service
Bạn cũng có thể thích
Can You Mate RF and FF Flanges? A Practical Guide for Safe Flange Connections
Learn whether RF and FF flanges can be mated, why face type mismatch affects gasket compression, and how to choose safer flange connections for industrial piping.
Read 33 · Comments 0
•
2026-06-24
ASME B16.5 Flange Guide: 2025 Latest Edition, Scope, Ratings and Dimensions
A practical ASME B16.5 guide covering the 2025 latest edition, NPS 1/2 through NPS 24 scope, flange classes, dimensions, materials, markings, testing and differences from ASME B16.42.
Đọc 115 · Bình luận 0
•
2026-06-22
Weld Neck Flange Guide: Socket Weld vs Weld Neck Flange, Uses, Standards and Selection
A professional weld neck flange guide covering socket weld vs weld neck flange differences, advantages, standards, dimensions, materials, installation and quotation requirements.
Đọc 293 · Bình luận 0
•
2026-06-21